Spunlace non-woven fabric
It is widely used in various products and places, but we don't know some precautions for the production of spunlace non-woven fabrics or the production workshop of spunlace pure cotton non-woven fabrics. In fact, we really don't need to know too much. Today we are just talking about it.
How does the industrial humidifier control the temperature and humidity of the spunlace cotton non-woven fabric factory? Industrial workshops generally encounter low humidity, especially textile workshops. For example, the spunlace non-woven fabric/spunlace pure cotton non-woven fabric workshop has low humidity, many flying flowers, woolen yarns, and broken ends, and the quality is not guaranteed.
Whether it is a textile workshop or other workshops, industrial humidifiers can solve the humidity problem in the workshop and improve production efficiency and product quality.
The temperature and humidity of the spunlace non-woven fabric workshop should be well controlled, which is related to the quality and efficiency of the product. In addition to the above-mentioned problems of flying and broken ends, the low humidity in the workshop will also have dust and static electricity problems, which have a great impact on normal production and processing, and can easily cause equipment failures and delay production.
China Huizhou Jinhaocheng Non-woven Fabric Co., Ltd. specializes in the production of high-quality spunlace non-woven fabrics, melt-blown non-woven fabrics, etc. Industrial humidifiers used in textile workshops can be called textile workshop humidifiers. They mainly spray water mist to increase the humidity of the workshop, thereby lowering the temperature. The water mist absorbs dust and settles to achieve the purpose of dust removal, and the humidity of the workshop is increased. , The condition of static electricity does not exist, and the water mist contains a lot of negative oxygen ions, which will neutralize the positive charge of the workshop, achieve the purpose of eliminating static electricity, and enable the workshop to normally produce and process high-quality spunlace non-woven fabrics/water Stabbed cotton non-woven fabric.
Generally speaking, after the humidity of the workshop reaches 40% RH, it is difficult for static electricity to appear again, and the suitable humidity range for different industrial workshops is also above 40% RH. Therefore, it is critical to choose an industrial humidifier with an appropriate amount of humidification. In fact, the industrial humidifiers of the Wuwang brand of Hangzhou Jiayou Industrial Co., Ltd. can meet this humidity requirement. The high-pressure micro-mist humidifier has a high applicability in different workshops. In addition to humidification, it can also be used in cement plants and gravel plants. Spray dust removal in factories, steel plants, etc., has the advantages of large humidification, fast humidification, small spray particles, low energy consumption, and high cost performance. Therefore, many industrial plants will choose industrial humidifiers when adjusting humidity.
The high-voltage micro-mist humidifier humidifies, whether it is used for humidification, cooling, dust removal, and static removal, the softened and filtered water is pressurized with a high-voltage pump, and then transported, and then sprayed through a special nozzle Small water mist, water mist can quickly evaporate in the air, moisten the air, absorb heat, and quickly solve the problems of humidity, temperature, dust, and static electricity in the workshop.
The above topics have carried out some simple understanding of the workshop control of spunlace cotton non-woven fabrics. As the best non-woven fabric company in China, Jinhaocheng non-woven fabrics mainly produce spunlace non-woven fabrics, medical melt-blown non-woven fabrics, and felt needles. Barbed non-woven fabrics, etc., including disposable masks. Welcome your calls or letters to contact us for business.
Our homepage: https://www.jhc-nonwoven.com/; E-mali: hc@hzjhc.net;lh@hzjhc.net
Post time: Aug-11-2021